Description
Product Description
Hikvision DS-KIS702Y
Specification Hikvision DS-KIS702Y
| Door station/System parameters | Processor | Embedded microcontroller |
| Operation system | Embedded Linux operation system | |
| Operation mode | One touch key | |
| Door station/Video parameters | Camera | 2MP super definition camera |
| Resolution | Main stream: 1920 × 1080, (720p / configurable); sub stream: 720 × 480 | |
| Night vision | Support low light and IR light supplement / mode | |
| Backlight compensation | Support | |
| Digital noise reduction | Support | |
| WDR | True WDR | |
| Field of view | Horizontal 146°, vertical 82° | |
| Video Compression Standard | H.264,H.265,MJPEG | |
| Stream | Main stream: 1080p@30fps, 720p@30fps / (configurable); sub stream: D1 | |
| Motion detection | Support | |
| Flash-avoid frequency | 50 Hz, 60 Hz | |
| Door station/Audio parameters | Audio input | Built-in omnidirectional microphone |
| Audio output | Loudspeaker, 20 cm sound effect > 80 db | |
| Audio quality | Noise suppression and echo cancellation | |
| Audio compression standard | G.711 U | |
| Audio compression Rate | 64 Kbps | |
| Audio intercom | Full-duplex two-way audio intercom | |
| Door station/Capacity parameters | Sub door station capacity | 16 |
| Door station/Network parameters | Network Protocol | TCP/IP, RTSP, IPV6, ONVIF |
| Door station/Device interfaces | Debugging port | 1 |
| RS-485 | 1 (1 for Hikvision's sub module communication) | |
| Alarm input | 4 (2 exit butttons and 2 door contacts by default) | |
| Lock control | 2 (2 relay, max to 30 VDC, 2 A) | |
| TAMPER switch | 1 | |
| Power interface | 12 VDC power output (12 V, 500 mA Max.) | |
| Door station/General | Working temperature | -40 °C to 60 °C (-40 °F to 140 °F) |
| Working humidity | 10% to 90% | |
| Installation | Surface mounting | |
| Protection level | IP 65 | |
| Button | 1 | |
| Power input | Powered by KAD704Y or KAD706Y series distribution | |
| Indoor station/System parameters | Operation system | Embedded Linux operation system |
| Memory | 128 MB | |
| Flash | 32 MB | |
| Indoor station/Display parameters | Display screen | 7-inch TFT LCD |
| Display resolution | 1024 × 600 | |
| Operation method | Capacitive touch | |
| Indoor station/Audio parameters | Audio input | Built-in omnidirectional microphone |
| Audio output | Built-in loudspeaker | |
| Audio quality | Noise suppression and echo cancellation | |
| Volume | Local or software control | |
| Audio compression standard | G.711 U, G.711 A | |
| Audio compression Rate | 64 Kbps | |
| Indoor station/Network parameters | Wired network | Two-wire network |
| Wireless network | Wi-Fi 802.11b/g/n | |
| Protocol | TCP/IP, SIP, RTSP | |
| Indoor station/Device interfaces | Network interface | Two-wire interface |
| RS-485 | 1 | |
| Alarm input | 8 zones alarm input | |
| Relay output | 2 | |
| TF card | Support, Max. 128 GB | |
| Indoor station/General | Power supply | Powered by KAD704Y or KAD706Y series distributor |
| Power consumption | ≤ 4 W | |
| Working temperature | -10 °C to 50 °C (14 °F to 122 °F) | |
| Working humidity | 10% to 90% | |
| Dimensions (W × H × D) | 200 mm × 140 mm × 23.6 mm (7.87" × / 5.51 × 0.93\") " | |
| Video Audio Distributor/Interfaces | Network interface | 1 RJ45 |
| Two-wire interface | 6 (2 for cascading and 4 for devices) | |
| Signal indicator | 6 | |
| Power indicator | 1 | |
| Reset | 1 | |
| Video Audio Distributor/General | Power supply | 24 VDC |
| Power consumption | CH1 to CH3<4 W, CH4<8 W | |
| Working temperature | -10 °C to 55 °C (14 °F to 131 °F) | |
| Working humidity | 10% to 90% |
*We have done our best to provide an accurate description and specifications. Please note that these were created and translated automatically using manufacturer data. Colors and appearance may look different depending on your monitor settings. Before buying, please check the product sheet from the manufacturer for official information. The “Specification” section may refer to different variants of the same device (depending on the exact model name/identifier). If anything is unclear or inconsistent, please contact the seller before purchase. If warranty information is provided, it refers to the manufacturer’s warranty unless stated otherwise. Product images may show multiple color variants. If the model name does not include a color designation, it typically refers to the default version (e.g., for cameras: white). Other variants are indicated in the product name, such as “Black” or “BLK”.
/DS-KIS702Y(305303992)_image_1.jpg)
/DS-KD8003Y-IME2(305303988)_image_1.jpg)
/DS-KH6320Y-WTE2(305303991)_image_1.jpg)