Description
Speedy Dual-Band AC1200 Wi-Fi With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices. | Boosted Wi-Fi Coverage with Beamforming Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP. |
Plug-and-Play Mesh Installation
Simply Plug and Unplug for Mesh Setup Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately) | Leave the Rest to Adaptive Routing Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability. |
Guide to Wiring and Physical Installation
Gigabit Port with Two PoE Options Supports two powering methods— | Mounting Kit Included A mounting kit is included in the box, supporting— |
Specifications
Hardware Features | Highlights | CPU: 880 MHz Dual-Core Processor | |
Flash: 16 MB (128 Mbit) | |||
DDR: 128 MB (1 Gbit) | |||
Interface | 1× Gigabit Ethernet (RJ-45) Port (Support IEEE802.3af PoE and Passive PoE) | ||
1× Reset Button | |||
Power Supply | 802.3af/at PoE | ||
24-57 V Passive PoE (+4,5pins; -7,8pins) | |||
Dimensions ( W×D×H ) | 240×100×53.7mm | ||
Antenna Type | 2× Detachable Omni-directional Antennas | ||
Mounting | Pole/Wall Mounting (Kits included) | ||
Wireless Function | Wireless Standard: | Wi-Fi 5 (802.11ac/n/g/b/a) | |
Frequency: | 5 GHz, 2.4 GHz | ||
Signal Rate: | 5 GHz: Up to 867 Mbps | ||
2.4 GHz: Up to 300 Mbps | |||
Bandwidth | 20/40/80 MHz | ||
Wireless Functions (Features with * require a Cudy AC as the gateway, Cudy AC's ETA is 2024 Q2) (Features with ** require a Cudy WR1300 or Cudy AC as the gateway) (Features with △ require a Cudy Mesh router/Mesh unit or Cudy AC as the gateway) | Multiple SSID * | ||
Captive Portal ** | |||
Seamless Roaming Mesh△ | |||
Self-Organizing Mesh△ | |||
Band Steering* | |||
Auto Channel Optimization* | |||
Enable/Disable Wireless Radio | |||
Transmit Power Control | |||
QoS (WMM) | |||
MU-MIMO | |||
Beamforming | |||
Rate Limit | |||
Reboot Schedule | |||
Wireless Schedule | |||
Wireless Encryption | WPA-PSK | ||
WPA2-PSK | |||
WPA-PSK/WPA2-PSK | |||
Security | Access Control | ||
Mac Filtering | |||
Wireless Isolation Clients | |||
Weather-Proof | Dust/Water-Proof | IP65 (Protection against any dust and low-pressure water from any directions) | |
Lightning Protection | 4 KV Lightning/Surge protection at the Ethernet port | ||
ESD | 8 KV Contact / 15 KV Air ESD protection | ||
Working Temperatures | -20/60°C Extend -40/65°C (Booted up in advance. Performance may drop slightly.) | ||
Operating Mode | Access Point | ||
Wi-Fi Router | |||
Range Extender | |||
WISP | |||
Mesh | |||
Package Content | Outdoor Wireless Access Point | ||
2× Detahcable Wi-Fi Antennas | |||
48 V / 0.3 A Passive PoE Adapter | |||
Mounting Kits | |||
Installation Guide | |||
Environment | Operating Temperatures: -20~60 °C (-4~140°F) ext. -40~65 °C (-40~149°F) | ||
Storage Temperature: -40–70 °C (-40–158 °F) | |||
Operating Humidity: 10–90% RH non-condensing | |||
Storage Humidity: 5–90% RH non-condensing | |||
System Requirements | Operating system that supports network/Wi-Fi connectivity, such as Windows, Android, macOS, iOS, or Linux |