Description
Up to 100 m wireless transmission distanceSpecial design for CCTV scenario with smooth video transmissionEasy configuration through web interfaceDual power supply mode options makes installation more flexibleSignal indicator helps to find the best installation position and direction300 Mbps 802.11n wirelessBuilt-in 8 dBi 2 × 2 MIMO AntennaIdeal solution for elevator connection
Technical specification
General | Net Weight | 0.69 kg | |
Installation | Pole | ||
Wireless | Standard | IEEE802.11 b/g/n | |
Operation Frequency | 2412 to 2472 MHz(Note:Available channel may vary depending on local regulations) | ||
Antenna | Internal, Gain 8dBi, H: 60° V: 30° | ||
Max Output Power | 20dBm (Note:Maximum output power may vary in different channels depending on local regulations) | ||
Receive sensitivity | -92±1.5 dBm@1 Mbps, -72±1.5 dBm@ MSC7 | ||
Max transmission Rate | 300 Mbps | ||
LED FIGWF | Gross weight | 0.77 kg | |
Hardware | Power Supply | 12 V/1 A passive PoE or 12 V/1 A DC | |
Interface | 10/100 M Base-TX × 1 | ||
Operation temperature | -30°C ~ 55°C (-22°F ~131°F) | ||
Storage temperature | -30°C ~ 70°C (-22°F ~158°F) | ||
Operation humidity | 10% - 90% RH (non-condensing) | ||
Dimensions | 193.5mm × 80mm × 67.5mm | ||
Software | Encryption | WPA-PSK/WPA2-PSK | |
Security | IP/MAC filter, SSID hidden | ||
Network Protocol | TCP/UDP/ARP/ICMP/HTTP/NTP | ||
Management and Logs | NTP, Syslog, SNMP | ||
Web based configuration | Supported | ||
Firmware Update | Support update firmware by Web page | ||
Bandwidth | 20M/40MHz | ||
Unmanaged PoE L2 Series | Max.power consumption | 2.8 W |