Description
Stable wireless transmission for elevatorHigh throughput for more channels500 m long transmission distanceEasy configurationCompact design
Dimensions
Technical specification
Wireless | Standard | IEEE802.11 b/g/n(2T2R 300Mbps) | |
Operation Frequency | 2412 to 2472 MHz(More Non-standard channels is availability,2312MHz to 2732MHz) | ||
Antenna | Internal, 6dBi, H: 65° V: 60° | ||
Max Output Power | 27dBm | ||
Receive sensitivity | -72dBm@65Mbps, -97dBm@1Mbps | ||
Max transmission Rate | 11n: 300Mbps(HT40)/130Mbps(HT20) 11g: 54Mbps | ||
Hardware | Power Supply | 48V/0.25A PoE or 12 VDC | |
Interface | 3×10/100M Base-TX (Cat. 5/5E, RJ-45) ports | ||
Operation temperature | -30℃ to +65℃(-22℉ to +149℉) | ||
Storage temperature | -40℃ to +85℃(-40℉ to +185℉) | ||
Operation humidity | 5% to 95%RH non-condensing | ||
Dimensions | 150×150×31.6 mm (5.9×5.9×1.24 inch) | ||
Software | Application Scenarios | Elevator Room/IP Camera | |
Encryption | WPA-PSK/WPA2-PSK | ||
Network Mode | Router/Bridge | ||
Security | IP/MAC filter, SSID hidden, Interface Isolation | ||
Network Protocol | TCP/UDP/ARP/ICMP/DHCP/HTTP/NTP | ||
TDMA | Supported (Extend private communication protocol) | ||
Auto ACK timing adjust | Supported (It can automatically detect the distances of the devices, keep the performance always the best) | ||
Management and Logs | NTP, Syslog, Telnet, AC | ||
Web based configuration | Supported | ||
Firmware Update | Support update firmware by Web page | ||
Bandwidth | 20M/40MHz |