Description
Super-Fast, Super-Efficient AX3000 Wi-Fi 6 Wi-Fi 6 with the highest 160 MHz channel width and 1024-QAM modulation provide up to 3 Gbps total throughput. OFDMA and MU-MIMO work on uplink plug download directions allowing it to connect over 100 devices while minimizing latency. (Max 512 devices) | Five PA and Antennas for High-Power Wi-Fi Coverage Equipped with five power amplifiers and an advanced 3+2 antenna structure, this AP delivers top-notch capabilities to navigate its signal through physical obstacles, providing extraordinary Wi-Fi coverage performance for a larger area. |
Plug-and-Play Mesh Installation
Simply Plug and Unplug for Mesh Setup Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately) | Leave the Rest to Adaptive Routing Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability. |
Guide to Wiring and Physical Installation
Gigabit Port with Two PoE Options Supports two powering methods— | Mounting Kit Included A mounting kit is included in the box, supporting— |
Specifications
Hardware Features | Highlights | CPU: 1.3 GHz Dual-Core ARM Cortex-A53 CPU | |
Flash: 128 MB (1 Gbit) | |||
DDR: 256 MB (2 Gbit) | |||
Interfaces | 1× Gigabit Ethernet Port (PoE-In) | ||
1× Reset Button | |||
1× WPS Button | |||
Power Supply | 802.3at PoE | ||
48-57 V Passive PoE (+4,5pins; -7,8pins) | |||
Dimension (W×D×H) | AP Body: 240×100×53.7 mm Height of AP with Antennas installed: 438 mm | ||
Antenna Type | 2× Detachable Omni-directional Antennas | ||
Mounting | Pole/Wall Mounting (Kit included) | ||
Wireless Function | Wireless Standard | Wi-Fi 6 (802.11ax/ac/n/g/b/a) | |
Frequency | 5 GHz, 2.4 GHz | ||
Signal Rate: | 5 GHz: Up to 2402 Mbps | ||
2.4 GHz: Up to 574 Mbps | |||
Bandwidth | 20/40/80/160 MHz | ||
Wireless Functions (Features with * require a Cudy AC as the gateway, Cudy AC's ETA is 2024 Q2) (Features with ** require a Cudy WR1300 or Cudy AC as the gateway) (Features with △ require a Cudy Mesh router/Mesh unit or Cudy AC as the gateway) | Fast Roaming △ | ||
Multiple SSID * | |||
Captive Portal ** | |||
Self-Organizing Mesh△ | |||
Band Steering* | |||
Auto Channel Optimization* | |||
Enable/Disable Wireless Radio | |||
Transmit Power Control | |||
QoS (WMM) | |||
MU-MIMO | |||
Beamforming | |||
Rate Limit | |||
Reboot Schedule | |||
Wireless Schedule | |||
Wireless Encryption | WPA-PSK | ||
WPA2-PSK | |||
WPA-PSK/WPA2-PSK | |||
WPA3-SAE | |||
WPA2-PSK/WPA3-SAE | |||
Security | Access Control | ||
Mac Filtering | |||
Wireless Isolation Clients | |||
VPN Server and Client Zerotier, Wireguard, OpenVPN, IPSec, L2TP, PPTP | |||
DNS over TLS Cloudflare, Google, Quad9 | |||
Weather-Proof | Dust/Water-Proof | IP65 (Protection against any dust and low-pressure water from any directions) | |
Lightning Protection | 6 KV Lightning/Surge protection at the Ethernet port | ||
ESD | 8 KV Contact / 15 KV Air ESD protection | ||
Working Temperatures | -20/60°C Extend -40/70°C (Booted up in advance. Performance may drop slightly.) | ||
Operating Modes | Access Point | ||
Wi-Fi Router | |||
Range Extender | |||
WISP | |||
Mesh | |||
Package Content | Outdoor Wireless Access Point | ||
2× Detahcable Wi-Fi Antennas | |||
Passive PoE Adapter | |||
Mounting Kits | |||
Installation Guide | |||
Environment | Operating Temperatures: -40~65 °C (-4~149°F) ext. -40~70 °C (-40~158°F) | ||
Storage Temperature: -40–70 °C (-40–158 °F) | |||
Operating Humidity: 10–90% RH non-condensing | |||
Storage Humidity: 5–90% RH non-condensing | |||
System Requirements | Operating system that supports network/Wi-Fi connectivity, such as Windows, Android, macOS, iOS, or Linux |