Description
Speedy Dual-Band AC1200 Wi-Fi With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices. | Boosted Wi-Fi Coverage with Beamforming Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP. |
Guide to Wiring and Physical Installation
10/100M Port with Passive PoE PoE Adapter included in package (Non-waterproof)— ● 24 V Passive PoE (Max power: 12 W, Idle: 2.5 W) | Mounting Kit Included A mounting kit is included in the box, supporting— |
Specifications
Hardware Features | Highlights | CPU: 580 MHz Processor |
Flash: 8 MB (64 Mbit) | ||
DDR: 64 MB (512 Mbit) | ||
Interface | 1× 10/100Mbps Ethernet (RJ-45) Port (Support Passive PoE) | |
1× Reset Button | ||
1× WPS Button | ||
Power Supply | 24 V Passive PoE (+4,5pins; -7,8pins) | |
Dimensions ( W×D×H ) | AP Body: 240×100×53.7 mm Height of AP with Antennas installed: 438 mm | |
Antenna Type | 2× Detachable Omni-directional Antennas | |
Mounting | Pole/Wall Mounting (Kit included) | |
Wireless Function | Wireless Standard: | Wi-Fi 5 (802.11ac/n/g/b/a) |
Frequency: | 5 GHz, 2.4 GHz | |
Signal Rate: | 5 GHz: Up to 867 Mbps | |
2.4 GHz: Up to 300 Mbps | ||
Bandwidth | 20/40/80 MHz | |
Wireless Functions | Multiple SSID | |
Enable/Disable Wireless Radio | ||
Transmit Power Control | ||
QoS (WMM) | ||
Band Steering | ||
MU-MIMO | ||
Beamforming | ||
Rate Limit | ||
Reboot Schedule | ||
Wireless Schedule | ||
Wireless Encryption | WPA-PSK | |
WPA2-PSK | ||
WPA-PSK/WPA2-PSK | ||
Security | Access Control | |
Mac Filtering | ||
Wireless Isolation Clients | ||
Weather-Proof | Dust/Water-Proof | IP65 (Protection against any dust and low-pressure water from any directions) |
Lightning Protection | 4 KV Lightning/Surge protection at the Ethernet port | |
ESD | 8 KV Contact / 15 KV Air ESD protection | |
Working Temperatures | -20/60°C Extend -40/65°C (Booted up in advance. Performance may drop slightly.) | |
Operating Mode | Access Point Mode | |
Router Mode | ||
RE Mode | ||
WISP Mode | ||
Package Contents | Outdoor Wireless Access Point | |
2× Detahcable Wi-Fi Antennas | ||
24 V Passive PoE Adapter | ||
Mounting Kits | ||
Installation Guide | ||
Environment | Operating Temperatures: -20~60 °C (-4~140°F) ext. -40~65 °C (-40~149°F) | |
Storage Temperature: -40–70 °C (-40–158 °F) | ||
Operating Humidity: 10–90% RH non-condensing | ||
Storage Humidity: 5–90% RH non-condensing | ||
System Requirements | Operating system that supports network/Wi-Fi connectivity, such as Windows, Android, macOS, iOS, or Linux |