Description

 

Speedy Dual-Band AC1200 Wi-Fi

With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices.

Boosted Wi-Fi Coverage with Beamforming

Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.

 

 

Plug-and-Play Mesh Installation

Simply Plug and Unplug for Mesh Setup

Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately)

Leave the Rest to Adaptive Routing

Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability.

 

Guide to Wiring and Physical Installation

Gigabit Port with Two PoE Options

Supports two powering methods—
802.3at/af PoE (Max power: 11 W, Idle: 7.5 W)
24-57 V Passive PoE (Adapter included, not waterproof)
If you need to simplify the wiring, we recommend using a PoE Switch that powers multiple devices simultaneously. See Cudy PoE Switches for more information.

Mounting Kit Included

A mounting kit is included in the box, supporting—
Wall-Mounting
Pole-Mounting

 

 

Specifications

 

Hardware Features Highlights CPU: 880 MHz Dual-Core Processor
Flash: 16 MB (128 Mbit)
DDR: 128 MB (1 Gbit)
Interface 1× Gigabit Ethernet (RJ-45) Port  (Support IEEE802.3af PoE and Passive PoE)
1× Reset Button
Power Supply 802.3af/at PoE
24-57 V Passive PoE (+4,5pins; -7,8pins)
Dimensions ( W×D×H ) 240×100×53.7mm
Antenna Type

2× Detachable Omni-directional Antennas

Mounting Pole/Wall Mounting (Kits included)
Wireless Function Wireless Standard:

Wi-Fi 5 (802.11ac/n/g/b/a)

Frequency: 5 GHz, 2.4 GHz
Signal Rate:  5 GHz: Up to 867 Mbps
2.4 GHz: Up to 300 Mbps
Bandwidth 20/40/80 MHz

Wireless Functions

(Features with * require a Cudy AC as the gateway, Cudy AC's ETA is 2024 Q2)

(Features with ** require a Cudy WR1300 or Cudy AC as the gateway)

(Features with △ require a Cudy Mesh router/Mesh unit or Cudy AC as the gateway)

Multiple SSID * 
Captive Portal **
Seamless Roaming Mesh△
Self-Organizing Mesh△
Band Steering*
Auto Channel Optimization*
Enable/Disable Wireless Radio
Transmit Power Control 
QoS (WMM)
MU-MIMO
Beamforming
Rate Limit
Reboot Schedule
Wireless Schedule
Wireless Encryption WPA-PSK
WPA2-PSK
WPA-PSK/WPA2-PSK
Security Access Control
Mac Filtering
Wireless Isolation Clients
Weather-Proof Dust/Water-Proof IP65 (Protection against any dust and low-pressure water from any directions)  
Lightning Protection

4 KV Lightning/Surge protection at the Ethernet port

 
ESD 8 KV Contact / 15 KV Air ESD protection  
Working Temperatures

-20/60°C

Extend -40/65°C (Booted up in advance. Performance may drop slightly.)

 
Operating Mode Access Point
Wi-Fi Router
Range Extender
WISP
Mesh
Package Content Outdoor Wireless Access Point
2× Detahcable Wi-Fi Antennas
48 V / 0.3 A Passive PoE Adapter
Mounting Kits
Installation Guide
Environment Operating Temperatures: -20~60 °C (-4~140°F) ext. -40~65 °C (-40~149°F)
Storage Temperature: -40–70 °C (-40–158 °F)
Operating Humidity: 10–90% RH non-condensing
Storage Humidity: 5–90% RH non-condensing
System Requirements

Operating system that supports network/Wi-Fi connectivity, such as Windows, Android, macOS, iOS, or Linux

Key features

Features
Producer: CUDY